- DESCRIPTION
- TECH DATA
- PRODUCT REVIEWS
- Documents
- Product Q & A
DESCRIPTION
BOSS BA440 Hydraulic Piston Air Compressor Producing up to 40 CFM @ 150 PSI
Weighing in at only 180lbs (dry), and with one of the smallest footprints in the market, the BOSS BA440 packs a punch producing up to 40cfm @ 150psi!
Weighing in at only 180lbs (dry), and with one of the smallest footprints in the market, the BOSS BA440 packs a punch producing up to 40cfm @ 150psi!
At the heart of the system is an aluminum, single stage, V4, pressure and splash lubricated reciprocating air compressor. Fully assembled in the U.S., the aluminum compressor assembly offers lighter weight and higher thermal efficiency than cast iron compressor assemblies. The BA440 includes an internal oil pump for increased lubrication over that of splash lubrication only compressors.
And here is what's exciting about the BA 440!
Now with our new design, we are as flexible as your hydraulic requirements. From 8 GPM to 12 GPM we can offer you a variety of outputs to fit your demands!
See the chart below for all the hydraulic pressure and flow requirements.
Routine maintenance items are accessible without the removal of the canopy.The compressor is direct coupled to a gear-type hydraulic driven motor, no need to replace and tension belts when time is of the essence!
The 180lbs dry weight of the BA440 is half that of competitive brands due to the aluminum compressor, enclosure and small footprint. The aluminum enclosure not only reduces weight, but also is rust resistant.
Also, included standard with the Boss BA440 are an integrated hydraulic system cooler, integrated solenoid and relief valve, 12 VDC fan assembly (24VDC optional), heavy-duty filtration and 18-month warranty.
Specifications
Type | Single-stage, 4-cylinder piston |
---|---|
Delivery | up to 40 cfm @ 100 psig (150 psig max) @ 1650 rpm |
Duty Cycle | Intermittent |
Power Source | Hydraulic motor |
Bore | 2.625" |
Stroke | 2.5" |
Displacement | 44 cfm* |
Cooling | Air |
Fan Diameter | 14.125" |
Hydraulic Flow @ 1650 RPM | 12 gpm |
Hydraulic Pressure | 2,100 psig (2400 psig max) |
Ambient Air Temp. | -20° to 100° F |
Max. Operating Slope | 20° |
Hydraulic System | Open center |
Reservoir Requirement | 12 gal. minimum (plus other hydraulic equipment manufactures requirements) |
Lubrication | Pressure lube |
Oil Capacity | 1.33 qts |
Electrical | 12VDC standard (24VDC optional) |
Hydraulic System Cooler | Included as standard (compressor hydraulic cooling only) |
Dimensions | 26.5" L x 19.125" H x 19.75" W** |
Enclosure | Powder-coated aluminum |
Weight | 180 lbs (dry) |
Warranty | 18-months |
Notes
- * At 1650rpm
- ** Add 2.625" to height for air filter cap.
- *** Minimum 22 Gallon Air Reservoir Required
TECH DATA
PRODUCT REVIEWS
Drawings & Manuals
Product Q & A
Sort By: