Chicago Pneumatic 4 Stage In Line Desiccant Dryer 1/2" NPT| QRS-7510XL12

Chicago Pneumatic  15 - 25 CFM 4 Stage In Line Desiccant Dryer 1/2" NPT | QRS-7510XL12

Features:

• First & Second Stage - Filter/regulator removes water in a liquid form as well as dirt, debris and pipe scale. Regulator reduces pressure to required level 
• Third Stage - Coalescing filter removes oil aerosols and microscopic particles removed 
• Fourth Stage - Desiccant dryer adsorbs water vapor from the air, producing a -30 ºF dew point

How It Works

FIRST AND SECOND STAGE ● The StageAir desiccant air drying system begins with the dual stage integral filter/regulator ● First, the air enters the particulate filter, which has a 5 micron cleanable sintered bronze element. In this stage, corrosive moisture, pipe scale, dirt and rust are removed from the air line protecting the precision parts in the regulator. ● Next, the air enters a high-performance regulator, which reduces primary pressure to a desired pressure setting.

THIRD STAGE COALESCING FILTER ● During Stage 3, fine filtration takes place. Here, 99.99 percent of oil aerosols and microscopic particles down to .01 micron absolute are removed from the air. The pop-up indicator alerts customer that an element change is necessary.

FOURTH STAGE DESICCANT AIR DRYER ● As the air enters the desiccant dryer, it is dispersed through a 70 micron element. The element distributes air evenly through the desiccant bed. The desiccant absorbs the water vapor from the air, producing a –40°F pressure dew point. ● To remove traces of desiccant dust before the air leaves the system, the air passes through a 40 micron filter element. The air is now clean and dry, and has been properly treated for use with your air operated system. ● The clear indicator sight glass shows a color change in the desiccant from blue to pink which indicates a desiccant recharge.